From: Kemal Yildirim \(Netron\) (Kemal.Yildirim@netron.com.tr)
Date: Tue Mar 28 2006 - 20:38:40 GMT-3
Hi Vishal,
First of all, you need a FXO card to call through PSTN, instead of FXS.
And 1700 series router is not a good choice for this purpose, if you
have a proper IOS , try below config.
voice-port 1/0/0
ring number 1
connetion plar 123
!
dial-peer voice 321 pots
destination-pattern 321
port 1/0/0
!
dial-peer voice 123 voip
destination-pattern 123
session protocol sipv2
session target ipv4:10.1.1.1
!
gateway
!
sip-ua
retry invite 2
retry response 2
retry bye 2
retry cancel 2
sip-server ipv4:10.1.1.1
Regards,
Kemal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Vishal Patel
Sent: Wednesday, March 29, 2006 2:55 AM
To: 'Cisco certification'
Subject: OT:voice config
Hi all,
Has anyone configured a 1700 series cisco router with a vic - fxs card ,
where we can terminate a Pots line on that and make it accept inbound
calls
and then map the cisco router to a SIP phone , using IP connectivity.
All i wanna do is when someone dials the pstn number , the sip phone
should
ring and i can also dial out from the sip phone to the pstn world.
Any ideas ?
Thanks
Vishal
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3