From: Loc Pham (loc.pham@comcast.net)
Date: Thu Mar 23 2006 - 03:48:53 GMT-3
On my 3660, 3640, "confreg" does the trick .
YMMV,
-------------- Original message ----------------------
From: CCIEin2006 <ciscocciein2006@gmail.com>
> Thanks - I don't see an option to change the console speed in rommon - does
> anyone know the command?
>
> On 3/22/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
> >
> > You can maybe change the console speed to 115200 and try xmodem with -y
> > option
> > Or Try uploading a small image and then copy the big image via FTP
> > HTH
> > Victor.
> >
> >
> > CCIEin2006 escribis:
> > > Hey group,
> > >
> > > I have a Cisco 3845 and the IOS image in flash is either corrupted or
> > has a
> > > bug so the router is contiuosly reloading itself.
> > > I tried downloading a new image using TFTP in rommon mode but
> > unfortuantely
> > > it keeps timing out. For some reason TFTP cannot handle large file
> > > transfers.
> > >
> > > Is there another way I can download a new image? Right now I am using
> > XMODEM
> > > and its probably going to take 13 hours to finish.
> > >
> > > Any ideas? Thanks in advance!
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3