From: Petr Lapukhov (petrsoft@gmail.com)
Date: Wed Mar 22 2006 - 03:46:45 GMT-3
Hello Dave,
Interesting question, can you provide more scenario detail?
I thought of MVR at first , but configuring just R2 prohibts
this idea.. Second idea was stub multicats routing, but
that requires some more configuration, above just touching R2..
TIA
Petr
2006/3/22, Schulz, Dave <DSchulz@dpsciences.com>:
>
> Group -
>
> If I have a multicast group that is running in sparse-mode with 3
> routers and a static RP.....R1, R2 and R3. I have a loopback on R3 that
> has a igmp join to 225.5.5.5. And, everything is working good and can
> ping the group from all routers, and everyone is happy. However, the
> next requirement is to have a router R4 attached to R2 that does not
> have multicast enabled, but allowing users on VLAN70 to reach this
> multicast group. And, you have to configure this on R2, not R4. Any
> thoughts?
>
> R1---------------R2(RP)------------------R3
> | s0
> \
> R4........VLAN70
>
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3