From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Mar 21 2006 - 19:34:47 GMT-3
Bill,
Instead of issuing the "clear ip bgp" command issue the "clear
ip bgp * in" or "clear ip bgp * out" commands. This instructs the
router to request or send a triggered BGP update through route-refresh.
This allows you to apply any new changes to the BGP table without having
to destroy and rebuild the entire BGP session.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Bill Wharton
> Sent: Tuesday, March 21, 2006 11:26 AM
> To: ccielab@groupstudy.com
> Subject: BGP timers
>
> I know there are BGP timers for keepalive & holdtime but is there any
way
> to
> speed up the process of BGP initialization from idle to active to
> established?
>
>
>
> In the lab, you are often changing parameters which require one to
issue a
> 'clear ip bgp' and when you do that, you have to wait over 30s for the
> results. I'm trying to help this situation
>
>
>
>
>
> Thanks
>
>
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3