From: James Ventre (messageboard@ventrefamily.com)
Date: Tue Mar 21 2006 - 14:35:39 GMT-3
For Hybrid you'll need to mark it down at CatOS. If you try to mark in
the MSFC you'll be marking packets that get punted .... which shouldn't
be your regular traffic flows.
James
James Ventre wrote:
> Native or Hybrid?
>
> James
>
>
>
> Bill.McKenzie@bisys.com wrote:
>> Can you set dscp on SVI?
>> I'm trying to set incoming traffic from a certain source to dscp 46 on an
>> MFSC on a core switch and then match the bit on edge router to prioritize
>> traffic. I'm seeing no hits on the access list. Source is vlan 70 and
>> I set
>> the policy on Vlan 50 (vlan the edge router is on) Am I missing
>> something?
>> Do I need to set it on vlan 70 or can you not set it on an SVI?
>>
>> Thanks,
>> Bill
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3