From: Dan Espino (drespino@gmail.com)
Date: Tue Mar 21 2006 - 02:03:50 GMT-3
I'd add debug ip routing to be sure that the table is stable and a tcl
script to rule out any reachability issues.
Dan Espino
On 3/16/06, xprtofnet <xprtofnet@yahoo.com> wrote:
> Folks,
>
> trying to iron out redistribution and here are my
> thoughts. Would appreciate any inputs.
>
> 1-The golden cmd for redistribution and to avoid any
> problems is the cmd:
> distance xxx 0.0.0.0 255.255.255.255 acl
>
> This cmd is specially applicable to RIP.
>
> 2- When ever you are doing High-AD >> Low-AD
> redistribution be cautious- specially when there are
> two or more point of redistribution.
> e.g Rip>>OSPF , EigrpExt>>Rip
>
> 3- if you do not want to use the cmd in option-1 then
> on any router that has 2 or more IGP redistributing in
> each other make their AD equal. This will not get you
> optimal routing but routing stabilty
>
> 4-if re-injection of routes are to be avoided (breaks
> redundancy) then use Route-Tags.
>
> 5-putting ospf in bgp- use match internal/external
>
> 6-you can not set AD of eigrp-EXT routes using option
> 1 cmd. you have to set all the eigrp-EXT to the same
> AD
>
> 7-use ospf p2p network on loopback so that it does not
> generate /32. this may result in suboptimal routing.
> same is the case with ospf-p2m
>
> Inputs are encouraged.
>
> m2c.
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3