From: John Matus (John.Matus@tokiom.com)
Date: Mon Mar 20 2006 - 19:08:00 GMT-3
opps..........wrong R3 config
interface Serial0/0
ip address 183.1.123.3 255.255.255.0
encapsulation frame-relay
clockrate 2000000
frame-relay map ip 183.1.123.1 302
frame-relay map ip 183.1.123.2 302
no frame-relay inverse-arp
frame-relay lmi-type cisco
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
"Joshua Lauer"
<jslauer@hotmail.
com> To
"John Matus"
03/20/2006 02:01 <John.Matus@tokiom.com>
PM cc
Subject
Re: dumb eigrp adj question
John,
Check out your IP address on the second
spoke..........They are dupes.........
JL
Joshua Lauer
CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
CISSP, CEH
----- Original Message -----
From: "John Matus" <John.Matus@tokiom.com>
To: <ccielab@groupstudy.com>
Sent: Monday, March 20, 2006 4:58 PM
Subject: dumb eigrp adj question
> ok, it's been awhile............
>
> hub and spoke eigrp in as 100 all on natural
> interfaces
> the hub and 1 spoke form an adj, muut the 2nd
> spoke will not form the adj,
> or rather, the 2nd spoke keeps dropping the adj
> must the hub never show
> that the adj was formed. i disabled
> split-horizon, but i forget if there
> is something else that i'm supposed to do
>
> R1- spoke
> interface Serial0/0
> bandwidth 1544
> ip address 183.1.123.1 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 183.1.123.2 102 broadcast
> frame-relay map ip 183.1.123.3 102
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
> R2-hub
> interface Serial0/0
> ip address 183.1.123.2 255.255.255.0
> encapsulation frame-relay
> no ip split-horizon eigrp 100
> frame-relay map ip 183.1.123.1 201 broadcast
> frame-relay map ip 183.1.123.3 203 broadcast
> no frame-relay inverse-arp
>
> R3- spoke (no adj)
> interface Serial0/0
> ip address 183.1.123.2 255.255.255.0
> encapsulation frame-relay
> no ip split-horizon eigrp 100
> frame-relay map ip 183.1.123.1 201 broadcast
> frame-relay map ip 183.1.123.3 203 broadcast
> no frame-relay inverse-arp
>
>
> layer 3 us up and both spokes can ping the hub and
> the others spoke
>
>
>
> Regards,
>
> John D. Matus
> Technical Support / PAS
> Fujitsu Consulting
> 626-568-7716
> John.Matus@tokiom.com
>
========================================================================================================
> This e-mail is intended solely for the
> individual to whom it is
> addressed. The information contained in
> this transmission contains
> confidential and/or proprietary information or is
> otherwise privileged. If
> the reader of this message is not the intended
> recipient, please be advised
> that any dissemination, distribution or
> copying of this transmission is
> strictly prohibited. If you have received
> this e-mail in error, please
> notify us immediately by returning it to the
> sender and deleting this copy
> from your system. Thank you
> for your cooperation.
>
========================================================================================================
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3