From: Chris Cole (CCole@EPLUS.com)
Date: Mon Mar 20 2006 - 13:38:27 GMT-3
I have the eigrp command that I sent out in the last e-mail on a live
network,
Hub:
Int tun 123
no ip next-hop-self eigrp 100
no ip split-horizon eigrp 100
Spoke:
Int tun 123
no ip next-hop-self eigrp 100
_____
From: Chris Broadway [mailto:midatlanticnet@gmail.com]
Sent: Monday, March 20, 2006 10:49 AM
To: Chris Cole
Cc: Mark Lasarko; groupstudy@american-hero.com; ccielab@groupstudy.com
Subject: Re: OT: DMVPN
Those should only go on the Hub. I have those commands there. When I
shift the config to A Hub to spoke configuration the same type of thing
happens, but the opposite. I see neighbors on the hub, but not on the
spokes. I removed the "ip next-hop-self" command from the hub. The only
difference between the two configs is that the spoke to spoke config
replaces the "tunnel destination" command with the "tunnel mode gre
multipoint" command. Any clues?
-Chris
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3