From: imam@intikom.co.id
Date: Mon Mar 20 2006 - 06:06:26 GMT-3
thank alex and chris your answer is satisfaction
rgds
IR
"Chris Lewis" <chrlewiscsco@gmail.com>
03/18/2006 09:19 PM
To: "Alexei Monastyrnyi" <alexeim@orcsoftware.com>
cc: imam@intikom.co.id, ccielab@groupstudy.com
Subject: Re: Priority command
Note that the policing function of the priority command only kicks in when
there is congestion on the link, if there is no congestion, no limit is
put on the priority traffic. If yo uwant to police priority traffic in the
absence of congestion, you need to also configure the police command.
Chris
On 3/18/06, Alexei Monastyrnyi <alexeim@orcsoftware.com> wrote:
Worth mentioning that "priority" also does policing for LLQ (with default
burst of 20% of configured value for priority queue), so that LLQ cannot
extend too much.
A.
----- Original Message -----
From: <imam@intikom.co.id>
To: <alexeim@orcsoftware.com >
Cc: <ccielab@groupstudy.com>
Sent: Thursday, March 16, 2006 10:50 AM
Subject: Re: Priority command
> Yes I just make sure the priority command used for low latency traffic
> like voice
>
> thank you alexei
>
> IR
>
>
>
>
>
> Alexei Monastyrnyi <alexeim@orcsoftware.com>
> 03/16/2006 03:33 PM
> Please respond to alexeim
>
> To: imam@intikom.co.id
> cc: ccielab@groupstudy.com
> Subject: Re: Priority command
>
>
> priority defines an LLQ for CBWFQ, i.e. a strict priority queue for
> low-latency traffic
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/qos_r/qos_o1g.htm#wp1076758
>
>
> on 16/03/2006 03:27 imam@intikom.co.id wrote:
>> Sorry I am wrong post I mean What is difference Priority command and
>> Bandwidth not Policy....
>>
>>
>>
>>
>>
>>
>> Alexei Monastyrnyi <alexeim@orcsoftware.com>
>> Sent by: nobody@groupstudy.com
>> 03/15/2006 06:53 PM
>> Please respond to Alexei Monastyrnyi
>>
>> To: imam@intikom.co.id
>> cc: ccielab@groupstudy.com
>> Subject: Re: Priority command
>>
>>
>> bandwidth is for queuing ( i.e. congestion management - guaranteed
>> minimum) while police is for policing (i.e. traffic limiting - allowed
>> maximum with no shaping).,...
>>
>> A.
>>
>> on 15/03/2006 12:38 imam@intikom.co.id wrote:
>>
>>> any body can explain me what is difference command Policy and
Bandwidth
>
>>> under policy map command....
>>>
>>>
>>> IR
>>>
>>>
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3