From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Fri Mar 17 2006 - 17:44:16 GMT-3
This should work. However, I have noticed that some of the 12.2
versions do not show the autocommand access-enable timeout when you do a
?. But, it is in there. Go ahead and try it. (similar to the ip pim
autorp listener command)
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mushtaq A. Khan
Sent: Friday, March 17, 2006 3:27 PM
To: Cisco certification
Subject: Limitation in Lock-and-Key Configuration in IOS 12.3??
All,
I am having trouble setting idle timeout with the *timeout* keyword in
the *
access-enable* command in the *autocommand* command. Is this an IOS
limitation? I checked the DOC CD for 12.3 configuration and sounds like
it
should be supported.
Am I missing anything here? Can any one shed some light on this? Is
there a
way I can achieve my goal as mentioned above?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fsecu
r_c/ftrafwl/scflock.htm#wp1001063
R1(config)#username test autocommand ?
LINE Command to be automatically issued after the user logs in
R1(config-line)#autocommand ?
LINE Appropriate EXEC command
no-suppress-linenumber Display service linenumber message
R1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.3(5a),
RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 25-Nov-03 06:00 by kellythw
Image text-base: 0x80008098, data-base: 0x81FFCCD8
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE
(fc1)
R1 uptime is 3 days, 5 hours, 36 minutes
System returned to ROM by reload
System restarted at 02:19:26 UTC Tue Mar 14 2006
System image file is "flash:c2600-adventerprisek9-mz.123-5a.bin"
[....]
TIA,
Mushtaq
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3