From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Mar 16 2006 - 10:03:23 GMT-3
IMO, it depends...
If it is a part of troubleshooting task (I had such once), you have to
change it to whichever makes your L2/L3 communications working.
Otherwise you don't have to bother yourself that much, until something
doesn't work. Since it is a locally significant setting, it can very
well be "encapsulation frame-relay" on one DTE router and "encapsulation
frame'relay ietf" on another, depending on how FR-switch is configured.
A.
on 16/03/2006 13:05 Salzano, Mario Arthur Costa wrote:
> Dear All,
>
> What would you do if there were "encapsulation frame-relay ietf" under
> one of the serials interfaces at the beginning of the lab test? Once, I
> had this condition, asked the proctor and she said that I could remove "
> ietf" and put "cisco". What's your opinion about this? Is there a better
> solution?
>
> Thanks!
>
>
>
>>>>
> _______________________________________________________________________
>
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>
> _______________________________________________________________________
>
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>
> _______________________________________________________________________
>
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3