From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Mar 13 2006 - 12:21:12 GMT-3
A couple areas where you should use it is on ISDN, with routing (like
ospf), or, where the requirement does not allow any /32 routes, I
believe.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Horobin, Darren
Sent: Monday, March 13, 2006 6:23 AM
To: Cisco certification
Subject: Peer Neighbour Route
Having just worked through an IE LAB. Version 3 Lab No 18. I have
configured a number of ppp circuits, everything has been working fine. I
thought I had met the requirment of the lab. But Looking at the solution
under all the PPP interfaces I noticed a command no peer
neighbour-route. Im happy with what the command does, however, their was
no ask for this expliclty in the lab, but when should it be used or not
Cheers
Darren
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager it@fibernet.co.uk.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
Fibernet (UK) Limited
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3