From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Mon Mar 13 2006 - 11:46:25 GMT-3
Looks like the router is only recognizing 2MBs of system RAM:
System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by
cisco Systems 2500 processor with 2048 Kbytes of main memory
How much RAM do you think you have in that box? If it should have 16MB then
maybe something's gone bad. If not, then you can max it out to 16MB very
inexpensively these days.
Rik
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
William Walla
Sent: Saturday, March 11, 2006 10:30 AM
To: ccielab@groupstudy.com
Cc: 'William Walla'
Subject: 2524 12.3 crashing loop
Cisco Internetwork Operating System Software IOS (tm) 2500 Software
(C2500-IS-L), Version 12.3(13b), RELEASE SOFTWARE
(fc2)
Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005
by cisco Systems, Inc.
Compiled Thu 11-Aug-05 15:58 by alnguyen Image text-base: 0x0307D43C,
data-base: 0x00001000
Guys/Ladies-
How do I fix this mess? I upgraded the ios to 12.3 (Must have been the
wrong one.) It was small enough to fit into flash and when it loaded it had
a memory allocation failure. Then it tries to load from the TFTP server
where I got the image from. Below:
Any help is appreciated!
wwalla
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions
as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted Rights clause at FAR
sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause at
DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software IOS (tm) 2500 Software
(C2500-IS-L), Version 12.3(13b), RELEASE SOFTWARE
(fc2)
Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005
by cisco Systems, Inc.
Compiled Thu 11-Aug-05 15:58 by alnguyen Image text-base: 0x0307D43C,
data-base: 0x00001000
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
%Software-forced reload
Unexpected exception to CPU vector 34, PC = 3396110
-Traceback= 3396110 337724C 3377A78 339CBE8 3389A1C 3389C3E 363E80C 339133E
33913BC 32B0298 32B05D4
=== Flushing messages () ===
Buffered messages:
Queued messages:
*Mar 1 00:00:08.491: %SYS-3-LOGGER_FLUSHING: System pausing to ensure
console debugging output.
*Mar 1 00:00:08.147: %SYS-2-MALLOCFAIL: Memory allocation of 4000 bytes
failed from 0x339CBE0, alignment 0
Pool: Processor Free: 0 Cause: Not enough free memory Alternate Pool: I/O
Free: 0 Cause: Not enough free memory
-Process= "Init", ipl= 4, pid= 3
-Traceback= 33771CE 3377A78 339CBE8 3389A1C 3389C3E 363E80C 339133E 33913BC
32B0298 32B05D4
Unexpecte
System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by
cisco Systems 2500 processor with 2048 Kbytes of main memory
SERVICE_MODULE(0): self test finished: Passed
%SERVICE_MODULE-4-ACCESSERROR: Unit 0 reports register access error - bad
register value supplied Loading c2500-is-l.123-13b.bin from 192.168.1.100
(via Ethernet0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!! [buffer overflow - 1205760/1205542 bytes]
F3: 15283864+878576+940428 at 0x3000060
System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by
cisco Systems 2500 processor with 2048 Kbytes of main memory
SERVICE_MODULE(0): self test finished: Passed Loading c2500-is-l.123-13b.bin
... [timed out]
F3: 15283864+878576+940428 at 0x3000060
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3