From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Mar 13 2006 - 11:32:32 GMT-3
Wouldn't we need to know where the web cache server is located. If it
is on the inside, for traffic leaving the network...we would have
redirect in on that inside port, correct? And, if the web cache server
is on the outside...we would have redirect out on the inside port,
correct? Please correct me if I'm wrong. Thanks!
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Godswill Oletu
Sent: Saturday, March 11, 2006 7:22 PM
To: Emil Patel; ccielab@groupstudy.com
Subject: Re: Intercepting HTTP traffic
Your configure is correct if g1/1 is the interface facing the internet
(or
destination of the web traffic). If g1/1 is the interface facing the
users
(or source of web traffic) use the 'redirect in' option intsead. It
follows
the same logic as the 'access-group' command.
----- Original Message -----
From: "Emil Patel" <emilpatel@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, March 11, 2006 6:54 PM
Subject: Intercepting HTTP traffic
> To intercept http traffic I have configured one of my production
router as
> following:
>
>
>
>
>
> Core-I> conf t
>
> Core-I> Ip wccp web-cache
>
> Int g 1/1
>
> Ip wccp web-cache redirect out
>
> Exit
>
>
>
> I am confused if I need rediect in for the incoming web traffic. Is
the
> above config correct and is that all I need to implement web-caching?
>
>
>
> Thanks
>
>
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3