From: Jung, Jin (jin.jung@lmco.com)
Date: Wed Mar 08 2006 - 12:52:45 GMT-3
Well, I know this is purely a cosmetic, but it will be nice to see one
ID per router for EIGRP process.
I have 7 router full mashed Rack, and depending on where I am it shows
me different ID ( neighbor interface ) for a router.
Thanks for your help,,
-----Original Message-----
From: Bajo [mailto:bajoalex@gmail.com]
Sent: Wednesday, March 08, 2006 10:49 AM
To: Jung, Jin
Cc: ccielab@groupstudy.com
Subject: Re: eigrp router-id does not show up.
Jung,
Am not sure if it was supposed to be shown up in "sh ip ei nei". I tried
clearing, removing ei and reinstalling it...etc to see the ID. No luck.
But sh ip ei top
shows it at top:
R5(config-router)#do sh ip ei top
IP-EIGRP Topology Table for AS(200)/ID(150.1.5.5)
On 3/8/06, Jung, Jin <jin.jung@lmco.com> wrote:
I have a simple question,
In my LAB, For some reason EIGRP router-id does not appear when I do
"show ip eigrp nei" command.
It still shows the neighbor interface IP address.
Is this normal and is there way to show eigrp router-id in the show ip
eigrp nei command.
Router eigrp 700
Eigrp router-id 2.2.2.2
"This message is intended only for the use of the intended
recipient(s) If you are not an intended recipient, you are hereby
notified that any use, dissemination, disclosure or copying of this
communication is strictly prohibited. If you have received this
communication in error please destroy all copies of this message and its
attachments and notify the sender immediately."
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3