From: Joe Rinehart (jjrinehart@hotmail.com)
Date: Tue Mar 07 2006 - 14:25:23 GMT-3
When I was short of routers and using a 7010 with 8 ports, I connected two
of the ports with a serial crossover cable and used the DTE port as the
frame port (not the switching port). Worked like a charm. Only changed
later because I got enough routers to load up all 8 ports and the 7010 had
older IOS...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Bill
Wharton
Sent: Tuesday, March 07, 2006 8:40 AM
To: ccielab@groupstudy.com
Subject: frame relay switch
Can an interface on a frame relay switch be used to participate in the cloud
itself? I'm running short of routers in my lab
Thank you
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3