From: David Vasek (dvasek@satx.rr.com)
Date: Tue Mar 07 2006 - 10:10:15 GMT-3
Hello,
You can put the loopback in a different area and use the area range
command to provide a summarized route to other areas. Basically, if you have
a loopback with IP 10.10.10.10/32 in area 1 and need to advertise a /24
address in area 0, use the command area 1 range 10.10.10.0 255.255.255.0.
At that point all other areas besides area 1 will see the loopback as having
a /24 mask.
HTH,
DV
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Evgeniy Voloshin
Sent: Tuesday, March 07, 2006 6:09 AM
To: ccielab@groupstudy.com
Subject: loopbacks /24 without ip ospf networ or redistribute
Hi group,
I want to know what is the third metod to advertise /24 loopback into ospf,
if I can not use ip ospf network redisribute
May be it is area range or summary route?
What is limitation are, if I use this command? May be I see /24 only in
some areas?
TIA!
--- Yev.
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3