split-horizon eigrp on full-mesh network

From: Matt White (mwhite23@gmail.com)
Date: Mon Mar 06 2006 - 20:02:40 GMT-3

• Next message: jnkmail4eva@yahoo.com: "BGP session"
• Previous message: jnkmail4eva@yahoo.com: "BGP path filtering"
• Next in thread: Brian Dennis: "RE: split-horizon eigrp on full-mesh network"
• Maybe reply: Brian Dennis: "RE: split-horizon eigrp on full-mesh network"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

What are people's thoughts regarding diabling split-horizon on the
following NBMA environments:

1) Full-mesh frame-relay; three routers. R1 S0 maps to 202 & 303, R2
S0 maps to 101 & 303, R3 S0 maps to 101 & 202

or

2) DMVPN, one hub and three spokes, all tunnel interfaces.

I say that you need it on each of the serial multi-point interfaces in
the three router frame, but only on the hub of the DMVPN tunnel...

Thoughts?

• Next message: jnkmail4eva@yahoo.com: "BGP session"
• Previous message: jnkmail4eva@yahoo.com: "BGP path filtering"
• Next in thread: Brian Dennis: "RE: split-horizon eigrp on full-mesh network"
• Maybe reply: Brian Dennis: "RE: split-horizon eigrp on full-mesh network"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3