From: KC (kanwal.chawla@gmail.com)
Date: Mon Mar 06 2006 - 13:46:02 GMT-3
Bob, interrupt me pleae if i am wrong
because i was practising the same one time, and u know whenever we see
Routers, we always get routes from LinkLocal address, So the best path rto
configure it to run BROADCAST command with linklocal mappin .
What do you say ???
Regards
KC
On 3/6/06, Bob Sinclair <bsinclair@netmasterclass.net> wrote:
>
> Hi Tran,
>
> As long as you have at least one broadcast keyword per protocol per DLCI,
> then
> all should work. In other words, it does not matter which unicast map has
> the
> broadcast keyword, as long as at least one of them has it.
>
> Hope that Helps,
>
> Bob Sinclair
> CCIE #10427, CCSI 30427
> www.netmasterclass.net
>
> ----- Original Message -----
> From: Tran HOang
> To: ccielab@groupstudy.com
> Sent: Monday, March 06, 2006 11:10 AM
> Subject: Hi group
>
>
> In case Frame-relay IPv6, when did use keywork broadcast at IPv6 or
> Link-local ???
> Exam :
> frame-relay map ipv6 FE80::2 102 broadcast
> frame-relay map ipv6 FEC0::124:2 102 broadcast
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3