From: Marc Russell (mrussell@ccbootcamp.com)
Date: Sun Mar 05 2006 - 20:46:16 GMT-3
See the pics below. This is a 32MB flash chip from a working Cisco 2620
router with 32MB Flash and XM code loaded on it.
http://www.ccbootcamp.com/2620fs32_1.jpg
http://www.ccbootcamp.com/2620fs32_2.jpg
Marc Russell
Network Learning, Inc. (A Cisco Learning Partner)
Ph# 248-620-9603
www.ccbootcamp.com/hardware.asp (CCIE practice hardware)
www.ccbootcamp.com (CCIE Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joshua
Sent: Saturday, March 04, 2006 4:48 PM
To: ccielab@groupstudy.com
Subject: 32 MB Flash for Cisco 2620 [bcc][faked-from]
Importance: Low
Hi, guys,
I bought a new 32 MB flash with MEM2620-32FSBOOT for cisco 2620 router.
After put them on, the bootrom shows version 12.2(10r)1, but system cannot
detect flash. The information printed on flash is "Intel DA28F640 J5A150
A3387544 Flash". I searched the part number "DA28F640" and get one result
says "Intel Flash EEPROM 64M 4Mx16/8Mx8". Does it mean this is 64M flash?
Can somebody please verify the chip for me before i call the seller for
sending the wrong part??
System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1) TAC Support:
http://www.cisco.com/tac Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 65536 Kbytes of main memory
bus error while trying to access flash - addr = 0x60000000 cannot read flash
info getdevnum warning: device "flash" has size of zero bus error while
trying to access flash - addr = 0x60000000 cannot read flash info getdevnum
warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0 trouble reading device magic
number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
Thanks!!
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3
