From: James Ventre (messageboard@ventrefamily.com)
Date: Wed Mar 01 2006 - 12:07:03 GMT-3
You have to come across the default routing table to hit the VTY lines.
If you want it to work on a different VRF - you need to change your ACL
statement
MSFC3(config-line)#access-class 7 in ?
vrf-also Same access list is applied for all VRFs
<cr>
James
sheherezada@gmail.com wrote:
> Hi,
>
> Is there a better way to restrict access to the VTY lines from certain
> VRFs/ VLANs, other than using ACLs/VACLs? I think that ACLs might not
> be effective because of overlapping address space and possible
> performance degradation.
>
> Thanks,
>
> Mihai
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:37 GMT-3