From: Leigh Harrison (ccileigh@gmail.com)
Date: Wed Mar 01 2006 - 07:31:31 GMT-3
Hey there Tony,
Not too sure what the requirement is here, but the config you've got
depends on the way the neighbour is configured.
If your neighbour is expecting you to have an AS number of, say 500 and
your actual as number is 100, then you would use the local as command,
or you could do some juggling with confederations.
The local-as command is used to "lie" to your neighbour so they think
that you've got a different as number. Very useful if you're changing
AS numbers and don't have config control of all of the neighbours.
Hope that covers it..
LH
tony hall wrote:
> Hi Group,
> Please if you can help me on EBGP issue.
>
> R1-----------------EBGP------------------R2
> AS 100 AS200
>
> I have to send my local AS to the EBGP peer.
>
> R1
> > router bgp 100
> neighbor 10.10.10.2 remote-as 200
> neighbor 10.10.10.2 local-AS 100
>
> --cant have lacal-AS same to BGP process--- ERROR
>
> Any help ?
>
> Tony.
>
> _________________________________________________________________
> The new MSN Search Toolbar now includes Desktop search!
> http://toolbar.msn.co.uk/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:37 GMT-3