From: Evgeniy Voloshin (e.voloshin@equant.ru)
Date: Mon Feb 27 2006 - 14:21:03 GMT-3
Bob,
no, I mean that I do snmpwalk on my 7507 and see, that cisco remeber
about who and when change nvram configuration file(copy run start, write
or write mem) last 10 times.
So I just what to know is it possible to do some show command to see this
last 10 changes with 7507's nvram config file?
--- Yev.Bob Sinclair wrote:
Yev, Not sure if you want to go down this path, but 12.3T allows you to run SNMP get commands within TCL. The output is in seconds of uptime. R1(tcl)#snmp_getone private 1.3.6.1.4.1.9.9.43.1.1.1.0 {<obj oid='ccmHistory.1.0' val='5378794'/>} R1(tcl)# So this config was changed after 5378794 seconds of uptime. Which could be subtracted from the current uptime, converted to seconds, to determine how long ago it was changed :} HTH, Bob Sinclair CCIE #10427, CCSI 30427 www.netmasterclass.net
----- Original Message ----- From: Evgeniy VoloshinTo: AlexCc: ccielab@groupstudy.comSent: Monday, February 27, 2006 10:08 AMSubject: Re: timestamps startup config Alex,
do you know some "show" commands to see this output via vty telnet session on cisco router?
--- Yev.
Alex wrote:
> How about getting this info via SNMP? oid 1.3.6.1.4.1.9.9.43.1.1.1 , > "ccmHistoryRunningLastChanged", > ftp://ftp.cisco.com/pub/mibs/oid/CISCO-CONFIG-MAN-MIB.oid . > Just try it and see if it works for You. > HTH > Cheers > Alex > > ----- Original Message ----- > From: <jnkmail4eva@yahoo.com> > To: <ccielab@groupstudy.com> > Sent: Monday, February 27, 2006 2:20 AM > Subject: Re: RE: timestamps startup config > > >> I tried that but I didn't get the same response as you suggested. >> I have a 2610 with the following IOS and config >> Cisco Internetwork Operating System Software >> IOS (tm) C2600 Software (C2600-I-M), Version 12.3(17a) >> >> test# wri mem >> Building configuration... >> [OK] >> test#sh run >> Building configuration... >> >> Current configuration : 977 bytes >> ! >> version 12.3 >> service timestamps debug datetime msec localtime show-timezone >> service timestamps log datetime localtime show-timezone >> no service password-encryption >> ! >> hostname test >> ! >> boot-start-marker >> boot system flash c2600-i-mz.123-17a.bin >> boot system flash c2600-i-mz.122-31.bin >> boot-end-marker >> ! >> ! >> no aaa new-model >> ip subnet-zero >> ip cef >> ! >> ! >> ! >> ! >> ! >> ! >> ! >> interface Ethernet0/0 >> no ip address >> half-duplex >> ! >> interface Serial0/0 >> no ip address >> clock rate 64000 >> ! >> interface Serial0/1 >> no ip address >> shutdown >> ! >> ip http server >> ip classless >> ! >> ! >> alias exec sir show ip route >> alias exec sib show ip interface brief >> alias exec sr show run >> alias exec sion sh ip ospf nei >> alias exec sien sh ip eigrp nei >> alias exec srb sh run | begin router bgp >> alias exec sre sh run | begin router eigrp >> alias exec srr sh run | begin router rip >> alias exec sro sh run | begin router ospf >> alias exec sibgs sh ip bgp su >> alias exec sibg sh ip bgp >> ! >> line con 0 >> line aux 0 >> line vty 0 4 >> login local >> ! >> ! >> end >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html > > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________ Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
-- С уважением, Евгений.
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3