From: Rafay Aslam (smrafay@gmail.com)
Date: Sat Feb 25 2006 - 15:03:24 GMT-3
On 2/25/06, Rafay Aslam <smrafay@gmail.com> wrote:
>
>
>
> On 2/25/06, Cisco certification <ccielab@groupstudy.com> wrote:
> >
> > Hi,
> >
> > You have tried to post to a GroupStudy.com certification mailing list.
> > Because
> > the server does not recognize you as a confirmed poster, you will be
> > required
> > to authenticate that you are using a valid e-mail address and are not a
> > spammer. By confirming this e-mail you certify that you are not sending
> > Unsolicited Bulk Email (UBE).
> >
> > PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS
> > EMAIL
> > YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE
> > POSTED.
> >
> >
> > By confirming this e-mail you also certify the following:
> >
> > 1. The message does NOT break Cisco's Non-Disclosure requirements.
> >
> > 2. The message is NOT designed to advertise a commercial product.
> >
> > 3. You understand all postings become property of GroupStudy.com
> >
> > 4. You have searched the archives prior to posting.
> >
> > 5. The message is NOT inflammatory.
> >
> > 6. The message is NOT a test message.
> >
> > To confirm, simply reply to this message. No editing is
> > necessary. Once
> > confirmed, you will be able to post without additional confirmations.
> >
> >
> > Welcome to GroupStudy.com!
> >
> >
> > First time posters to GroupStudy.com are required to agree to the
> > GroupStudy terms and conditions.
> > Replying to this email, certifies you have read and agree to the
> > GroupStudy posting guidelines and terms and conditions.
> >
> > --- Original Message Follows ---
> >
> > Date: Sat, 25 Feb 2006 12:56:52 -0500
> > From: "Rafay Aslam" <smrafay@gmail.com>
> > To: ccielab@groupstudy.com
> > Subject: Trunk of 5505
> >
> > Hi
> > I am trying to setup trunk between my 2 Catalyst 5505s. I get this error
> > message when i try to enable trunk on my fast ethernet port. I want to
> > know
> > if i can enable trunk on fastehternet ports on 5505s or it has to be
> > fiber
> > ports on SUP III. Below is errors message, show ver and show module.
> > I tried enabling trunk of all of my ethernet module but got the same
> > message.
> >
> > SW1 (enable) set trunk 2/13 on dot1q
> > Feature not supported on Module 2.
> > SW1 (enable)
> >
> > SW1 (enable) set trunk 2/13 auto
> > Feature not supported on Module 2.
> > SW1 (enable)
> >
> >
> > SW1 (enable) sh ver
> > WS-C5505 Software, Version McpSW: 5.5(19) NmpSW: 5.5(19)
> > Copyright (c) 1995-2003 by Cisco Systems
> > NMP S/W compiled on Mar 27 2003, 17:53:27
> > MCP S/W compiled on Mar 27 2003, 17:47:48
> >
> > System Bootstrap Version: 5.1(2)
> >
> > Hardware Version: 1.0 Model: WS-C5505 Serial #: 066572009
> >
> > Mod Port Model Serial # Versions
> > --- ---- ---------- --------- ----------------------------------------
> > 1 2 WS-X5530 015926337 Hw : 3.4
> > Fw : 5.1(2)
> > Fw1: 4.4(1)
> > Sw : 5.5(19)
> > WS-F5531 015735216 Hw : 2.0
> > WS-U5533 015733996 Hw : 1.0
> > 2 24 WS-X5224 022359370 Hw : 1.5
> > Fw : 3.1(1)
> > Sw : 5.5(19)
> > 3 24 WS-X5224 022150757 Hw : 1.5
> > Fw : 3.1(1)
> > Sw : 5.5(19)
> > 4 24 WS-X5224 022355793 Hw : 1.5
> > Fw : 3.1(1)
> > Sw : 5.5(19)
> > 5 1 WS-X5302 019507332 Hw : 7.7
> > Fw : 20.22
> > Fw1: 3.1(1)
> > Sw : 12.2(32)
> >
> > DRAM FLASH NVRAM
> >
> > (Original message truncated)
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3