From: roy bustos (roybustos@hotmail.com)
Date: Thu Feb 23 2006 - 13:30:43 GMT-3
Hi Guys!
I've got a switching problem which has been brought to me, and was wondering
if you guys could provide some insight...
I've got this network with 3 switches, the hub is a 6509 and the spokes are
4506s anyways, there is one 4506 that suddenly stopped working for 40
minutes. I've checked everything in it and even opened up a Cisco case about
it. Cisco and I found no problem, it wasn't a spanning tree issue or
anything, and I checked the logs and had nothing in it, the trunks were
running fine. I'm suspecting that it was a VTP issue since even nodes within
the switch that have static IPs were unable to contact each other, so it may
have lost VLAN information, but then nothing in the log points to that. The
6509 runs as a VTP sever and the spokes run as VTP clients. I came from
environments that ran all switches in transparent mode.
We are running VTP version 1 at the server and version 2 at the spokes.
Thanks.
Roy Bustos
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3