From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Wed Feb 22 2006 - 11:59:02 GMT-3
IPerf is a nice tool thanks for that link, but if you like one for
Windoze, http://www.st.rim.or.jp/~yumo/index.html
It does not give you report of nothing, and with the help of the CLI
command or the web administration page of the networking device you can
do your troubleshooting.
Also in Cisco Devices there is something called RTR
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_c/fcprt3/fcd301d.htm
HTH
Victor
Kulcsar Andras Benjamin escribis:
> Hi,
>
> Try iperf:
>
> http://sourceforge.net/projects/iperf
>
> "Iperf was developed by NLANR/DAST as a modern alternative for measuring maximum TCP and UDP bandwidth performance. Iperf allows the tuning of various parameters and UDP characteristics. Iperf reports bandwidth, delay jitter, datagram loss."
>
> Regards,
> Andras Kulcsar
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Otawa
> Sent: Wednesday, February 22, 2006 2:17 PM
> To: nobody@groupstudy.com; ccielab@groupstudy.com
> Subject: trrafic ginirator
>
>
> Hi,
>
>
>
> Any body have traffic generator software in order to test the performance of networking equipments?
>
>
>
> Best regards.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3