From: Mitchell, TJ (tmitchell@allianttech.com)
Date: Tue Feb 21 2006 - 18:49:19 GMT-3
I'm not sure about that because I have a client network running RIPv2
and my core switches won't generate a default route without either a
route already in the routing table or a static default route.
T.J.
T.J. Mitchell, CCNA, CCDA, CCNP, CCDP
Sr. Network Engineer
Alliant Technologies, LLC
tmitchell@allianttech.com
Office: 617-369-9095
Mobile: 508-868-6853
www.AlliantTech.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
xprtofnet
Sent: Tuesday, February 21, 2006 11:16 AM
To: Ice Fire; 'tony hall'
Cc: ccielab@groupstudy.com
Subject: RE: ADV to null0
you can generate default with rip w/wo a default in
rt.
i think from the requirment below...you do
summarization in ospf. then redistribute that null0
route in rip by using route-map to match only that
route.
m2c
--- Ice Fire <fire_ice@verizon.net> wrote:
> I don't believe that RIP will send a default route
> if there isn't a default
> route in the routing table. This is the reason for
> the null0 route, create a
> default route to Null0 the redistribute that, then
> longer prefix takes over
> once the packet hits the router.
>
> Thanks
>
> Ice Fire
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of tony
> hall
> Sent: Monday, February 20, 2006 6:24 AM
> To: ccielab@groupstudy.com
> Subject: ADV to null0
>
> Hi,
> Please if someone can explain the config below.
>
> router rip
> redistribute ospf 1 metric 5 route-map NOADV
> route-map NOADV deny 10
> match int null0
> route-map NOADV permit 20
>
> The requirment is to only send one route to RIP
> domain from OSPF , which
> contains sevral routes from other Protocols.
> Is not the best way to orignate default route
> instead?
>
>
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3