FR MP interfaces / FR switch

From: Mike O (mikeeo@msn.com)
Date: Tue Feb 21 2006 - 16:03:57 GMT-3

• Next message: zillah: "Fwd: Advertise VLAN into BGP"
• Previous message: kagbomson@comcast.net: "Test - Test"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hey all Im trying to create a frame-relay switch with 3 routers and the
switch using multipoint interfaces, but on the FR switch I get the follow
error.

Lab_Router-9(config)#int s1/1:1
Lab_Router-9(config-if)# frame-relay route 108 interface Serial0/1:1 106
Can't use same dlci on overlapping circuits

FR switch config:
interface Serial0/1:1
no ip address
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 106 interface Serial1/1:1 108
!
interface Serial1/0:1
no ip address
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 107 interface Serial1/1:1 108
!
interface Serial1/1:1
no ip address
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 108 interface Serial1/0:1 107

How do I create a multipoint interface?

• Next message: zillah: "Fwd: Advertise VLAN into BGP"
• Previous message: kagbomson@comcast.net: "Test - Test"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3