From: Jack Ross (gs@dfwmall.net)
Date: Tue Feb 21 2006 - 01:25:20 GMT-3
What happens if you assign a subinterface on a router with a native vlan,
and have an ip address configured on the physical interface? Will both the
1.1.1.0 network, and the 2.2.2.0 network get sent as untagged? Is this like
mixing 2 IP subnets on a hub.
Is there ever a need to have both "sw tru nat vlan 22" and "sw acc vlan 22",
or some other combinations of vlan numbers configured on the same
switchport?
fa 0/0
ip add 1.1.1.1 255.255.255.0
fa 0/0.1
ip add 2.2.2.2 255.255.255.0
encap dot 22 native
fa 0/0.2
encap dot 23
ip add 3.3.3.3 255.255.255.0
Cat
fa 0/1
switch trun enc dot
switch trun native vlan 22
switch mode trunk
Muchas Gracias
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3