802.1q and 10mb/s ethernet

From: Darren Pedley (darren@dnsl.com)
Date: Fri Feb 17 2006 - 13:38:00 GMT-3

• Next message: Ivan: "Re: OSPF authentication using key & PW without config. on"
• Previous message: xprtofnet: "Re: OSPF authentication using key & PW without config. on"
• Next in thread: James Ventre: "Re: 802.1q and 10mb/s ethernet"
• Maybe reply: James Ventre: "Re: 802.1q and 10mb/s ethernet"
• Maybe reply: Chris Lewis: "Re: 802.1q and 10mb/s ethernet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

A little off ccie topic but....

802.1q is physically a larger frame type right? (or is that ISL?), which means you need 100 full duplex or something right?

Does somebody have a good understanding of this? and perhaps options which may be available if only 10mb/s is available.

Ta

Darren

• Next message: Ivan: "Re: OSPF authentication using key & PW without config. on"
• Previous message: xprtofnet: "Re: OSPF authentication using key & PW without config. on"
• Next in thread: James Ventre: "Re: 802.1q and 10mb/s ethernet"
• Maybe reply: James Ventre: "Re: 802.1q and 10mb/s ethernet"
• Maybe reply: Chris Lewis: "Re: 802.1q and 10mb/s ethernet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3