From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Feb 17 2006 - 04:31:10 GMT-3
If you need to redistribute only one interface in via connected, why
wouldn't you use a route-map to allow only the interface you want to be
redistributed in?
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
forwardtruth@yahoo.com
Sent: Thursday, February 16, 2006 10:33 PM
To: ccielab@groupstudy.com
Subject: EIGRP and connected command
IWEB- V1 Lab 5 Task 5.22-5.24
R4:
router ospf 1
redistribute connected subnets route-map CONNECTED2OSPF
1- Do we use "connected" command as extra command----I know what is the
use of this command (replacement of network command) ,,,because I have
see this command has been used in some lab and it has not been used in
other (to my "limit knowledge" all these labs have same requiremnet in
this specific command).
2- The lab 5 has not stated that "route-map" to be used ,,,,why has it
been used in this lab (5) ?
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3