From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Feb 17 2006 - 03:29:04 GMT-3
The values used are arbitrary. You shouldn't worry about the values
used for redistribution in the real lab unless a task specifically
states to use certain values or use values that will influence path
selection.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
forwardtruth@yahoo.com
Sent: Thursday, February 16, 2006 10:14 PM
To: ccielab@groupstudy.com
Subject: EIGRP and default metric vlues
IWEB V1 Lab5 Task 5.22 - 5.24
R1:
router eigrp 200
redistribute rip metric 10000 1000 100 1 1500
We know that the default values for EIGRP are 10000 100 255 1 1500
Wht are the above vlues used with redistribute command ?
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3