From: Brian (briane@surewest.net)
Date: Thu Feb 16 2006 - 13:00:21 GMT-3
The ws-x6748-ge-tx is a cef 720 line card and requires a sup 720. It is
a fabric enabled module with no classic bus connection.
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin0900a
ecd800f6e27.html
Brian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Metla, Venu
Sent: Thursday, February 16, 2006 7:39 PM
To: fferrer10@vodafone.es; ccielab@groupstudy.com
Subject: RE: ws-x6748-ge-tx support
We are using these atm. I think they require native and sup 720
A word of caution is that some of these modules have a issue with them .
When you order make sure you receive these modules with hardware
revision number more than 2.3 . Otherwise they will go down into "pwr
down" mode and the only work around is to repalce with a new module
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
fferrer10@vodafone.es
Sent: Friday, 17 February 2006 2:06 AM
To: ccielab@groupstudy.com
Subject: OT: ws-x6748-ge-tx support
Hi all:
Anyone knows if Catalyst 6500 with supervisor 1A and using hybrid code
can support the ws-x6748-ge-tx line card?
I've seen Cisco docs that seem contradictories... unfourtunately, i
haven't the apropiate hw to test this issue... it seems that if you have
catos 8.1.2 it works but i am not totally sure.
Anyone can help? Anyone has this type of config?
Regards
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3