From: Venkatesh Palani (kvpalani@gmail.com)
Date: Thu Feb 16 2006 - 23:46:18 GMT-3
Hi,
This is one way,
trunk do1q between R1 and switch ( aallowing vlans 20 and 10 ) and do IRB on
the router between these two vlans create a BVI with the required IP address
and it should work.
Thank you,
venkatesh
On 2/17/06, Ice Fire <fire_ice@verizon.net> wrote:
>
> Guys -
>
> I have a question regarding configuring multiple vlans to one router port
> with a single address.
>
>
>
> R1
>
> |
>
> |
>
> Sw1 ------- R2
>
> |
>
> |
>
> R3
>
>
>
> R3 is in VLAN 20 with address 172.16.10.3 /25
>
> R2 is in VLAN 10 with address 172.16.10.2 /25
>
> R1 is in both VLANS with address 172.16.10.1 /25
>
>
>
> I know it can be done, but I can't seem to find my lab where I have done
> this before.
>
>
>
> How can this be configured to work correctly?
>
>
>
> Thanks
>
>
>
>
>
> Ice Fire
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3