From: Jens Petter Eikeland (jenseike@start.no)
Date: Mon Feb 13 2006 - 08:02:41 GMT-3
No, this is not allowed to do in the lab unless they specific ask
for it... anyway I am sure the lab is not made to test if you are
able to set a enable or line password on a router. So my advice is to get
Rid of that habit, so you don't do I by mistake in the lab..
jp
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Anis
Faruqui
Sent: 13. februar 2006 10:26
To: Cisco certification
Subject: configuring default password
Dear All,
I need your valuable advice on my this thought.When ever I do some lab as my
regular way of doing things I type
Service password-encryption
line vty 0 4
login
password cisco
enablse secret cisco
This I do with all my labs and each router involved in the LAB but I have
never seen any lab asking to do this .so what am I doing is right is it
allowed to do so in the LAB ?
Please give your valuable inputs on this thought of mine :)...
regards,
Anis Faruqui..
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3