From: Mark Lasarko (mlasarko@co.ba.md.us)
Date: Thu Feb 09 2006 - 15:32:32 GMT-3
Rack1R6#tclsh
Rack1R6(tcl)#foreach add {
+>150.1.6.6
+>150.1.16.16
+>150.1.26.26
+>150.1.36.36
+>} {puts [exec "ping $add"]}
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.6.6, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.16.16, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.26.26, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.36.36, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Rack1R6(tcl)#tclquit
Rack1R6#sh ver
Cisco IOS Software, 3800 Software (C3845-ADVENTERPRISEK9-M), Version
12.4(4)T1
HTH,
~M
>>> "Ice Fire" <fire_ice@verizon.net> 02/09/06 12:42 PM >>>
Guys I have a 12.4 router and this is what I get..
R1(tcl)#foreach address {
+>192.168.1.1
+>} {puts {exec "ping address"}}
exec "ping address"
R1(tcl)#foreach address {
+>192.168.1.1
+>} {puts {exec "ping $address"}}
exec "ping $address"
What am I doing wrong?
Thanks
Ice Fire
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brent Foster
Sent: Friday, February 03, 2006 9:57 AM
To: Brent Foster; Popgeorgiev Nikolay; Chris Lewis
Cc: Theerapol Boonnan; ccielab@groupstudy.com
Subject: RE: how to create tcl script ping test?
Nevermind, my router is 12.3, so old syntax must
apply. It works.
--Brent
--- Brent Foster <jbrentfoster@yahoo.com> wrote:
> When I try this on my router, it does not seem to be
> working:
>
> router4#tclsh
> +>foreach address {
> +>172.16.20.1
> +>172.16.30.1
> +>} {puts {exec "ping $address"}
> +>
> +>
>
> Nothing happens! Anyone know what is wrong here?
>
> --- Popgeorgiev Nikolay
> <nikolay.popgeorgiev@siemens.com> wrote:
>
> > Thanks Chris,
> >
> > You are right !
> >
> >
> >
> > Best,
> > N.
> >
> >
> >
> > -----Original Message-----
> > From: Chris Lewis [mailto:chrlewiscsco@gmail.com]
> > Sent: Friday, February 03, 2006 4:10 PM
> > To: Popgeorgiev Nikolay
> > Cc: Theerapol Boonnan; ccielab@groupstudy.com
> > Subject: Re: how to create tcl script ping test?
> >
> > Nick,
> >
> > That script worked well for me on 12.2 routers.
> For
> > some reason on
> > 12.4routers (that will appear in the lab) it needs
> > to be amended
> > slightly to the
> > following to display an output.
> >
> > tclsh
> > foreach address {
> > x.x.x.x
> > y.y.y.y
> > } {puts {exec "ping $address"}
> >
> > Chris
> >
> > On 2/3/06, Popgeorgiev Nikolay
> > <nikolay.popgeorgiev@siemens.com> wrote:
> > >
> > > Theerapol,
> > >
> > > You can use this:
> > >
> > >
> > > tclsh
> > > foreach address {
> > > x.x.x.x
> > > y.y.y.y
> > > } {ping $address rep2}
> > >
> > >
> > > best,
> > > Nick
> > >
> > >
> > > -----Original Message-----
> > > From: Theerapol Boonnan
> > [mailto:theerab@net1.co.th]
> > > Sent: Tuesday, January 31, 2006 5:07 AM
> > > To: ccielab@groupstudy.com
> > > Subject: how to create tcl script ping test?
> > >
> > > Anyone know about how to create tcl script for
> > ping test? And can I use
> > > this tcl script in lab exam?
> > >
> > >
> > >
> > > Theerapol
> > >
> > >
> >
>
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3