From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Thu Feb 09 2006 - 07:09:01 GMT-3
Hi Sameer,
Since you need to have the clients with a stratum of 3 in order to
accomplish that you need to configure the server with a stratum of 2, so
in this case the clients will be getting the stratum with a value of 3.
Solution:
SW: loopback 0's SW: 12.12.7.7
ntp server 12.12.1.1
ntp source loopback 0
R4: loopback 0's R4: 12.12.4.4
ntp server 12.12.1.1
ntp source loopback 0
R1: (the server) Loopback 0's R1: 12.12.1.1
ntp master 2
ntp source loopback 0
Note that I haven't configured any stratum value on SW since this router
will
be getting this value from the server (R1)
If you have a way to set this up please do it and then let me know if
everything worked fine.
Regards,
Andy
--------------------------------------------------------------------
From: Ivan <ivan@iip.net>
Reply-To: Ivan <ivan@iip.net>
To: ccielab@groupstudy.com, sameer azam <sameer.azam@gmail.com>
Subject: Re: NTP Quesion
Date: Thu, 9 Feb 2006 11:56:47 +0300
>lake(config)#ntp master ?
> <1-15> Stratum number
>
>
> > The topology is like follows;
> >
> > SW
> >
> >
> >
R1______---_______R4
> >
> > The link between R1 & Sw is Ethernet connection.
> > The link between R1 & R4 is Frame-Relay Connection.
> >
> > The QUESTION IS;
> >
> > You need to configure the R4 & SW for STRATUM 3
> > Both of R4 & SW should get get their time clock from the R1.
> >
> > How would you do this?
> >
>
>--
>Ivan
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3