From: Jörg Buesink (buesink@fma.nl)
Date: Tue Feb 07 2006 - 10:07:56 GMT-3
you can also use the "ip multicast-helper" command
with kind regards,
Jvrg
********************* Internet Email Confidentiality Notice
************************
This email is confidential and intended only for the use of the individual to
whom it is addressed. If you are not the intended recipient, be advised
that you have received this email in error and that any use, dissemination,
forwarding, printing, or copying of this email is strictly prohibited.
________________________________
From: nobody@groupstudy.com on behalf of Evgeniy Voloshin
Sent: Tue 7-2-2006 12:26
To: easyman.lin
Cc: GroupStudy CCIE-Lab
Subject: Re: Unicast neighbor for RIP
Dear Lin,
can you write some example for unicast rip neighboring with NAT?
--- Yev.easyman.lin wrote:
>I'm a little bit confused of your question. >AFAIK there is no neighbor relationship between to RIP speaking routers. >They only send and receive updates but not forming neighbor relationship. > >I suppose you are asking of sending update to multicast address 224.0.0.9 >but received as an unicast from neighbors. >If that's true then you need to use nat function to achieve this. > > >HTH. >Regards, >Lin > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >Theerapol Boonnan >Sent: Tuesday, February 07, 2006 2:31 PM >To: Cisco certification >Subject: Unicast neighbor for RIP > >Hi > > > > I have a question about RIP, by default RIP will use >multicast 224.0.0.9 to form neighbor. If I just want to form unicast >neighborship between R1 & R2 but don't use "neighbor" statement. How can >I do this? > > > >Theerapol > >_______________________________________________________________________ >Subscription information may be found at: >http://www.groupstudy.com/list/CCIELab.html > >_______________________________________________________________________ >Subscription information may be found at: >http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3