RE: Is it must to configure the "bgp router-id",

From: Akaradeth.N@datacraft-asia.com
Date: Tue Feb 07 2006 - 07:16:24 GMT-3

• Next message: Mark Lewis: "Re: mpls-vpn help"
• Previous message: Nick: "Chris, about your tcl script for 12.4"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Pandi,

It is not necessary to configure the "bgp router-id", anyway it is easier to
identify the router running bgp, when you check neighbor connection (using
show ip bgp sum).

Anyway if you change the "bgp router-id" the peer connection will be
disconnected.

I think we should enter the "bgp router-id" command on every routers running
bgp.

Please correct me,

Akaradeth

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
Sent: Tuesday, February 07, 2006 3:53 PM
To: Cisco certification
Subject: Is it must to configure the "bgp router-id",

Hi group,

When we configure the BGP peering, is it must to configure the "bgp

router-id", because in the Internet Expert lab work book, for some scenario

they configure for the router-id, and for some not,

 Need your advice on this, thanks in advance.

Regards.

Pandi

• Next message: Mark Lewis: "Re: mpls-vpn help"
• Previous message: Nick: "Chris, about your tcl script for 12.4"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3