From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Sun Feb 05 2006 - 18:29:36 GMT-3
How many routes do you have on the routing table? You might have an MTU
issue so that eigrp believes it has a 1500 byte mtu interface for instance
and hence sends an eigrp update packet too big. Try lowering the mtu on both
ends and let us know
-- Richard
-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com] De la part de
xprtofnet
Envoyi : dimanche 5 fivrier 2006 20:10
@ : Nadeem Zahid (iszahid); ccielab@groupstudy.com
Objet : Re: Issue with EIGRP routes
try disabling ip eigrp split-horizon...
--- "Nadeem Zahid (iszahid)" <iszahid@cisco.com>
wrote:
> I see that when I'm running EIGRP on top of PPPoFR
> between two
> routers...I don't get the advertised EIGRP routes
> on the other side. Removing the VT/PPP from the
> subint and running it
> over FR directly, everything works.
> Any known issues? One side is Hssi, other side is
> Serial but I don't
> think that is the problem.
> thnx
>
> Nadeem
>
>
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3