QinQ

From: Vishal Patel (vpatel@accessproviders.com.au)
Date: Tue Jan 31 2006 - 19:15:43 GMT-3

• Next message: Vishal Patel: "RE: QinQ"
• Previous message: Jonathan Stevens: "Re: Feedback on labs in Asia Pac"
• Next in thread: Vishal Patel: "RE: QinQ"
• Maybe reply: Vishal Patel: "RE: QinQ"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,
 
Is anyone using QinQ for the Metro services on a production network ?
 
I have a following scenario
 
Iam try to lab up a scenario where I have 3500XL as CPE , sending vlans 10
to 250.
 
This is connected to 3524 with asymmetric link deploying dot1q tunnel.
 
And 3524 has only one vlan i.e vlan 335 for passing all the customer
vlans.
 
When I connect this 3524 to another 3524 with a dot1q or ISL trunk , I can
get all the customer vlans to another 3500 XL works fine.
 
But I wanna connect it to a router in between and map the Service Vlan with
the ethernet subinterface and send all the customer vlans via that.
 
But as soon as I configure "encap dot1q 335 second-dot1q any" I can
communicate with the vlan 335 on the SP switch.
 
Any ideas ?
 
Thanks
 
Vishal

• Next message: Vishal Patel: "RE: QinQ"
• Previous message: Jonathan Stevens: "Re: Feedback on labs in Asia Pac"
• Next in thread: Vishal Patel: "RE: QinQ"
• Maybe reply: Vishal Patel: "RE: QinQ"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:51 GMT-3