From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Sun Jan 29 2006 - 01:20:06 GMT-3
The requirement says to let "users" that plug into the switch should
not have to wait for forwarding delay. Since fa0/2 is connected to a
router, users will not plug into that port. KEY - users in vlan 2.
Faryar Zabihi
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hashiru Aminu
Sent: Saturday, January 28, 2006 2:57 PM
To: ccielab@groupstudy.com
Subject: IRWB-RSv3 LAB 1 task 1.3/1.4
Dear All,
Looking through the requirement of task 1.3 and 1.4 we are to enable
portfast and BPDUguard for ports in VLAN 2.n the solution guide the
features were enabled on fa0/10 and fa0/11 but going back to the table
of VLAN/Port assignment on of the LAB SW1 fa0/2 connected to Fa0/0 of R2
is in VLAN 2.
I believe the solution should include fa0/2 of SW1.
I hope im not reading too much in to the requirements.
I stand to be corrected.
Someone with better understanding should shade some light on this
please.
TIA
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3