From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jan 23 2006 - 19:48:27 GMT-3
That is because "ms" is being interpreted by the IOS as the command
"mstat". You can type "telnet ms" or change the hostname.
IE-AS#ms ?
Hostname or A.B.C.D Source to trace route from
vrf Select VPN Routing/Forwarding instance
<cr>
IE-AS#mstat ?
Hostname or A.B.C.D Source to trace route from
vrf Select VPN Routing/Forwarding instance
<cr>
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joshua
Sent: Monday, January 23, 2006 2:01 PM
To: ccielab@groupstudy.com
Subject: Configure APC MasterSwitch with Cisco 2511
Group,
I bought a used APC MasterSwitch AP9210 for the lab. When i tried to
config
Reverse Telnet to the Master Switch, i could not make it work. What i
did is
add this command line to 2511 router " ip host ms 2007 192.168.1.20".
When i
access it from 2511 by type "ms", it started to ask me Source ip,
destination ip..blah..blah.
Can somebody give me some suggestion?
Thanks,
Joshua
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3