From: Henk de Tombe (henk.de.tombe@qi.nl)
Date: Mon Jan 23 2006 - 10:03:24 GMT-3
Hi group,
I was playing around with the intervals for announcing candidate RP's with
the autorp feature. On the candidate RP I've changed the interval to a few
seconds to speed up things a bit. On the mapping agent I did the same. If
you look with the question mark what options are available, only the
carriage return is there.
The documentation doesn't mention the interval option as well. The output
below shows something different. If I'm beating a dead horse, don't flame me
to much.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/himc_r
/mlt_i2h.htm#wp1070361
<http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/himc_
r/mlt_i2h.htm#wp1070361>
Rack1R1(config)#ip pim send-rp-discovery tunnel14 scope 10 ?
<cr>
Rack1R1(config)#ip pim send-rp-discovery tunnel14 scope 10 interval 10
Rack1R1(config)#
Rack1R1(config)#
Rack1R1(config)#
Rack1R1(config)#do deb ip pim auto-rp
PIM Auto-RP debugging is on
Rack1R1(config)#
Rack1R1(config)#
Rack1R1(config)#
*Mar 1 05:35:17.606: Auto-RP: Build mapping (224.111.111.111/32,
RP:150.1.8.8), PIMv2 v1,
*Mar 1 05:35:17.606: Auto-RP: Build mapping (224.222.222.222/32,
RP:150.1.9.9), PIMv2 v1.
*Mar 1 05:35:27.606: Auto-RP: Build mapping (224.111.111.111/32,
RP:150.1.8.8), PIMv2 v1,
*Mar 1 05:35:27.606: Auto-RP: Build mapping (224.222.222.222/32,
RP:150.1.9.9), PIMv2 v1.
Rack1R1(config)#
Rack1R1(config)#
Rack1R1(config)#
Rack1R1(config)#ip pim send-rp-discovery tunnel14 scope 10 interval 2
Rack1R1(config)#
Rack1R1(config)#
Rack1R1(config)#
*Mar 1 05:35:37.606: Auto-RP: Build mapping (224.111.111.111/32,
RP:150.1.8.8), PIMv2 v1,
*Mar 1 05:35:37.606: Auto-RP: Build mapping (224.222.222.222/32,
RP:150.1.9.9), PIMv2 v1.
*Mar 1 05:35:39.606: Auto-RP: Build mapping (224.111.111.111/32,
RP:150.1.8.8), PIMv2 v1,
*Mar 1 05:35:39.606: Auto-RP: Build mapping (224.222.222.222/32,
RP:150.1.9.9), PIMv2 v1.
*Mar 1 05:35:41.606: Auto-RP: Build mapping (224.111.111.111/32,
RP:150.1.8.8), PIMv2 v1,
*Mar 1 05:35:41.606: Auto-RP: Build mapping (224.222.222.222/32,
RP:150.1.9.9), PIMv2 v1.
*Mar 1 05:35:43.606: Auto-RP: Build mapping (224.111.111.111/32,
RP:150.1.8.8), PIMv2 v1,
*Mar 1 05:35:43.606: Auto-RP: Build mapping (224.222.222.222/32,
RP:150.1.9.9), PIMv2 v1.
Regards,
Henk
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3