From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Jan 22 2006 - 09:24:18 GMT-3
You can install a 32 meg flash simm in a 262X after the bootrom has been
upgraded (MEM2620-32FSBOOT). Also you can not install 2x16M to get 32
megs since the 2600 has only one flash slot.
Rack1R1#sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(15)T16, RELEASE
SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 19-Apr-05 12:23 by ssearch
Image text-base: 0x80008098, data-base: 0x81D1B5FC
ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-JS-M), Version 12.2(15)T16, RELEASE SOFTWARE
(fc2)
Rack1R1 uptime is 3 days, 15 hours, 55 minutes
System returned to ROM by reload
System restarted at 20:17:16 UTC Wed Jan 18 2006
System image file is "flash:c2600-js-mz.122-15.T16.bin"
cisco 2620 (MPC860) processor (revision 0x102) with 61440K/4096K bytes
of memory.
Processor board ID JAD04430GE7 (2143954775)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Rack1R1#
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jonathan Stevens
Sent: Sunday, January 22, 2006 1:45 AM
To: CCIEin2006; Cisco certification
Subject: Re: IE LAB4 OSPFv3 on 2620
The 2600s don't support the 32M flash cards (I don't think), so you
would have to use 2X16M
CCIEin2006 wrote:
>Hello - I had the same issue. To run ospfv3 you need at least IP PLUS
image
>which requires 32meg flash. I think you cannot get 32meg flash on the
2620's
>without a BIOS upgrade.
>
>On 1/18/06, jacque vincent <jacque_vincent@hotmail.com> wrote:
>
>
>>In it is ask to configure IPV6 ospfv3 on R1 and R2. What IOS do you
load
>>on
>>the 2620/2621 to be able to run IPV6 ospfv3. I used this image
>>c2600-j1s3-mz.122-15.T17.bin and it does not work.
>>
>>_________________________________________________________________
>>MSN. Calendar keeps you organized and takes the effort out of
scheduling
>>get-togethers.
>>
>>
>>
>>
>http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&S
U=http
>://hotmail.com/enca&HL=Market_MSNIS_Taglines
>
>
>>Start enjoying all the benefits of MSN. Premium right now and get the
>>first two months FREE*.
>>
>>______________________________________________________________________
_
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3