From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Jan 20 2006 - 02:33:38 GMT-3
In a HUB and Spoke Topology??
Ip pim nbma could help here?
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
Mohammed Shameen Abdul Jabbar
Enviado el: viernes, 20 de enero de 2006 1:23
Para: Gustavo Novais
CC: de Witt, Duane; Rionando@swadharma.com; ccielab@groupstudy.com
Asunto: Re: Multicast : Auto RP with PIM NBMA mode
Hi,
I would like to know what are the problems that is encountered when
configuring PIM NBMA on frame-relay on Auto-RP.
regards
Shamin
On 1/12/06, Gustavo Novais <gustavo.novais@novabase.pt> wrote:
>
> Hi
>
> See the comand ip pim auto-rp listener.
>
> It will enable auto-rp groups (224.0.1.39 and 224.0.1.40) be dense
> flooded even if you only have sparse-mode configured.
>
> HTH
>
> Gustavo Novais
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> de Witt, Duane
> Sent: quinta-feira, 12 de Janeiro de 2006 8:09
> To: Rionando@swadharma.com; ccielab@groupstudy.com
> Subject: RE: Multicast : Auto RP with PIM NBMA mode
>
> Maybe this can help:
>
> Choosing a Default RP
> Sparse mode environments need a default RP; sparse-dense mode
> environments do not. If you have sparse-dense mode configured
> everywhere, you need not choose a default RP.
>
> Adding Auto-RP to a sparse mode cloud requires a default RP. In an
> existing PIM sparse mode region, at least one RP is defined across the
> network that has good connectivity and availability. That is, the ip pim
> rp-address command is already configured on all routers in this network.
>
>
> Use that RP for the global groups (for example, 224.x.x.x and other
> global groups). There is no need to reconfigure the group address range
> that RP serves. RPs discovered dynamically through Auto-RP take
> precedence over statically configured RPs. Assume it is desirable to use
> a second RP for the local groups.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Rionando@swadharma.com
> Sent: 12 January 2006 04:44 AM
> To: ccielab@groupstudy.com
> Subject: Multicast : Auto RP with PIM NBMA mode
>
> Hi Guys,
> I have a problem Auto RP with PIM NBMA mode in frame-relay. Since auto
>
> RP need Dense mode to learned and the other side PIM NBMA mode do not
> recomended Dense mode to operate.
> Any suggestion ?
>
>
>
>
> Yoshe Rionando Y.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3