From: ronald.kaduwa@bell.ca
Date: Thu Jan 19 2006 - 11:10:09 GMT-3
Hi group,
Here is a representation of my config:
Interface FastEthernet 0/1
Ipv6 address 2001:abc:abcd:1::2/125
Ipv6 nat
Interface Serial 0/0
Ip add 172.16.123.2 255.255.255.0
Ipv6 nat
Ipv6 nat v6v4 source 2001:abc:abcd:1::6 172.16.123.6
Ipv6 nat v4v6 source 172.16.123.1 2001:abc:abcd:dd::6
Ipv6 nat prefix 2001:abc:abcd:dd::/96
Ipv6 router ospf 1
Router-id 2.2.2.2
Redistribute connected
I believe this is all I need to enable v6 to v4 translation and vice
versa, but can someone explain to me why when I ping from either cloud
to the other I get this output [!.!.!.!.!.!.!.!] instead of
[!!!!!!!!!!!!!]? On the 172.16.123.1 router in the v4 cloud, I have
static arp entry for the NAT ip address. I even tried with a static
route but get the same results.
Thanks,
Roni.
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3