From: Fernando Rodriguez (fernanrl@yahoo.com)
Date: Thu Jan 19 2006 - 05:59:57 GMT-3
Hi,
Thanks for the reply. License is ok, already have it
for active/active. My main concern is how to
connect/configure the scenario with just three
interfaces for active/active.
Instead of having the inside(back end)-outside(front
end)-failover interfaces, could I connect the failover
ethernets to the switches in the front end? This way I
could pass traffic through the old fail-over
interfaces too, having two interfaces per pix to the
front end and just one to the back end, using one of
the front end interfaces for fail over as well. Is
this fixable?
Regards
--- Guilherme Correia <razzolini80@hotmail.com>
escribis:
> Hi,
>
>
> Active/Active failover is only available to security
> appliances in multiple
> context mode. In an Active/Active failover
> configuration, both security
> appliances can pass network traffic.
> Additionally, I believe you have to upgrade your
> current failover license,
> so you can use it without a "primary" unit close by,
> if you havent already
> done so.
>
> Hth,
>
>
>
>
>
>
>
>
>
>
> From: Fernando Rodriguez <fernanrl@yahoo.com>
> Reply-To: Fernando Rodriguez <fernanrl@yahoo.com>
> To: "ccielab@groupstudy.com"
> <ccielab@groupstudy.com>
> Subject: OT: Pix active/active failover
> Date: Thu, 19 Jan 2006 09:02:34 +0100 (CET)
>
> Hi,
>
> First of all, thansk for your time. I have a
> question
> implementing active/active failover on a pix with
> 7.0.
> I have two pix 535 with 3 ethernets (inside, outside
> and failover). Until now they were in active/pasive
> but I would like to put them in active/active. Is
> there a way of doing this WITHOUT installing any
> more
> ethernet cards? Further more, can this be done using
> just one context? I found this info:
>
>
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008045247e.html#wp1096075
>
> Can I implement it some other way?
>
> Kindest regards,
>
> Fernando
> CCIE#144XX CCNP CCDP
>
>
>
>
> ______________________________________________
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y msviles desde 1 cintimo por
> minuto.
> http://es.voice.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3