From: Mitchell, TJ (tmitchell@allianttech.com)
Date: Thu Jan 19 2006 - 01:10:12 GMT-3
You guys are fast..
Thanks
T.J. Mitchell
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gary Ring
Sent: Wednesday, January 18, 2006 11:04 PM
To: T.J. Mitchell
Cc: Cisco certification
Subject: Re: DTP
Yes that would stop DTP on that port.
Gary Ring
On 1/18/06, Gary Ring <garyring.work@gmail.com> wrote:
>
> Wait, I'm starting to question myself now. I may have jumped the gun
> about the listening for frames. I think it will still listen for DTP
> frames. Could someone verify? Thanks.
>
> Gary Ring
>
> On 1/18/06, Gary Ring <garyring.work@gmail.com> wrote:
> >
> > Man you guys are fast. :-)
> >
> > Gary Ring
> >
> > On 1/18/06, Gary Ring < garyring.work@gmail.com> wrote:
> > >
> > > T.J.
> > >
> > > First you have to answer the question, "What is DTP and what is it
> > > used for?"
> > >
> > > The Cisco answer: Dynamic Trunking Protocol (DTP) for negotiating
> > > trunking on a link between two devices and for negotiating the
type of
> > > trunking encapsulation (802.1Q or ISL) to be used
> > >
> > > That being said. You must specify the type of encapsulation you
want
> > > to use on the trunk link (dot1q or isl). Then, you must issue the
command
> > > switchport mode trunk. This sets the port to a trunk
unconditionally
and it
> > > will no longer use DTP frames to try to negotiate becoming a trunk
nor
will
> > > it listen for DTP frames.
> > >
> > > Gary
> > >
> > > On 1/18/06, T.J. Mitchell <tj.mitchell@verizon.net> wrote:
> > > >
> > > > Guys -
> > > >
> > > > How would you disable DTP on the 3550 series switch?
> > > >
> > > >
> > > >
> > > > Thanks
> > > >
> > > >
> > > >
> > > > T.J. Mitchell
> > > >
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3