From: Marc Bruyere \(EU\) (marc.bruyere@eu.didata.com)
Date: Wed Jan 18 2006 - 11:17:20 GMT-3
-------- Message d'origine--------
De: Cisco certification [mailto:ccielab@groupstudy.com]
Date: mer. 18/01/2006 15:14
@: Marc Bruyere (EU)
Cc:
Objet: Please confirm (conf#282bf55f017867686d5412ccf0e864c0)
Hi,
You have tried to post to a GroupStudy.com certification mailing list.
Because
the server does not recognize you as a confirmed poster, you will be
required
to authenticate that you are using a valid e-mail address and are not a
spammer. By confirming this e-mail you certify that you are not sending
Unsolicited Bulk Email (UBE).
PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
By confirming this e-mail you also certify the following:
1. The message does NOT break Cisco's Non-Disclosure requirements.
2. The message is NOT designed to advertise a commercial product.
3. You understand all postings become property of GroupStudy.com
4. You have searched the archives prior to posting.
5. The message is NOT inflammatory.
6. The message is NOT a test message.
To confirm, simply reply to this message. No editing is necessary. Once
confirmed, you will be able to post without additional confirmations.
Welcome to GroupStudy.com!
First time posters to GroupStudy.com are required to agree to the GroupStudy
terms and conditions.
Replying to this email, certifies you have read and agree to the GroupStudy
posting guidelines and terms and conditions.
--- Original Message Follows ---
Subject: Difference between Policy cir and bandwidth xxx
Date: Wed, 18 Jan 2006 15:14:22 +0100
From: "Marc Bruyere \(EU\)" <marc.bruyere@eu.didata.com>
To: <ccielab@groupstudy.com>
Hi,
Can someone please explain me the difference between :
Policy cir xxxx
and
bandwidth xxxx
under the class - and police-map command.
Thx
Rgds
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3